1• Place your Lampe Berger on a stable surface away from any
source of heat. Remove the
openwork shade and the cap.
2• Fill your Lampe Berger full with Lampe Berger Parfum de
Maison leaving enough room for the insertion of the wick. Wipe
the Lampe Berger carefully of excess fluid. Due to the new
material
of the burner, using any other fragrance other than Parfum de
Maison will effect and eventually clog the burner and ruin it!
3• Insert the wick fully into the neck of the Lampe Berger, then
check to make sure the burner is inserted. Place the cap on the
neck and leave the wick to soak for a full 20 minutes, no less
than the time instructed.
4• Light the burner and leave the flame to burn for a complete 2
minutes. No less, no more. Blow out the flame. Warning: never
place the openwork shade over the flame.
5• Your Lampe Berger is now operating. Never touch the burner
during operation. Place the openwork shade over the burner.
6• To extinguish your Lampe Berger, remove the openwork
shade and place the cap on the burner then place the openwork
shade on the lamp.
7• When relighting your Lampe Berger we recommend that the
lamp is at a minimum of half full.
8• After relighting your Lampe Berger, if it stops working after a
few minutes, then relight it again and it will work.
source of heat. Remove the
openwork shade and the cap.
2• Fill your Lampe Berger full with Lampe Berger Parfum de
Maison leaving enough room for the insertion of the wick. Wipe
the Lampe Berger carefully of excess fluid. Due to the new
material
of the burner, using any other fragrance other than Parfum de
Maison will effect and eventually clog the burner and ruin it!
3• Insert the wick fully into the neck of the Lampe Berger, then
check to make sure the burner is inserted. Place the cap on the
neck and leave the wick to soak for a full 20 minutes, no less
than the time instructed.
4• Light the burner and leave the flame to burn for a complete 2
minutes. No less, no more. Blow out the flame. Warning: never
place the openwork shade over the flame.
5• Your Lampe Berger is now operating. Never touch the burner
during operation. Place the openwork shade over the burner.
6• To extinguish your Lampe Berger, remove the openwork
shade and place the cap on the burner then place the openwork
shade on the lamp.
7• When relighting your Lampe Berger we recommend that the
lamp is at a minimum of half full.
8• After relighting your Lampe Berger, if it stops working after a
few minutes, then relight it again and it will work.
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |