| Instructions for Use Easy Scent - Lampe Berger Cold Fragrancing System |
How to Start Easy Scent
This all-new cold release system is a modern and easy-to-use diffuser.
EasyScentTM home allows to fragrance your home and deodorise safely the
ambient air.
When using for the 1st time, open compartment under the diffuser and pull the
transparent
plastic tab to activate batteries.
1.Lift the diffuser top part and insert the refill in the location.
2.Press the On/Off button and adjust the fragrance diffusion intensity by
turning this button.
3.Replace the top part and enjoy hours of intermittent fragrancing.
This all-new cold release system is a modern and easy-to-use diffuser.
EasyScentTM home allows to fragrance your home and deodorise safely the
ambient air.
When using for the 1st time, open compartment under the diffuser and pull the
transparent
plastic tab to activate batteries.
1.Lift the diffuser top part and insert the refill in the location.
2.Press the On/Off button and adjust the fragrance diffusion intensity by
turning this button.
3.Replace the top part and enjoy hours of intermittent fragrancing.
How to stop my EasyScent diffuser ?
.You are able to stop the diffuser when you want by pressing on the button
on/off
.You are able to stop the diffuser when you want by pressing on the button
on/off
The LED Blue is flashing.
The blue LED flashes twice, then stays on to indicate that everything is
working.
If it flashes quickly, there is an operating problem and there is no diffusion.
Turn off the diffuser by pressing the on/off button. Check that the refill is
correctly positioned. Restart the diffuser.
If it flashes slowly (after 149 hours of working), the diffusion will continue but
the fragrance refill is almost empty. Plan to change it.
The LED Blue does not flash.
The refill is empty. After 150 hours of working, there is no fragrance.
Change it. The batteries are worn out or discharged. Replace
them.
The blue LED flashes twice, then stays on to indicate that everything is
working.
If it flashes quickly, there is an operating problem and there is no diffusion.
Turn off the diffuser by pressing the on/off button. Check that the refill is
correctly positioned. Restart the diffuser.
If it flashes slowly (after 149 hours of working), the diffusion will continue but
the fragrance refill is almost empty. Plan to change it.
The LED Blue does not flash.
The refill is empty. After 150 hours of working, there is no fragrance.
Change it. The batteries are worn out or discharged. Replace
them.
How to store your fragrance refill ?
.Replace the unfinished fragrance refill back in its storage box. It will retain
longer its olfactory qualities while remaining free from dust.
.Replace the unfinished fragrance refill back in its storage box. It will retain
longer its olfactory qualities while remaining free from dust.
How to change fragrance ?
1.Always make sure your EasyScentTM Home diffuser is correctly stopped,
2.Remove the refill,
3.Choose the fragrance you want
4.Place your new refill in the diffuser.
1.Always make sure your EasyScentTM Home diffuser is correctly stopped,
2.Remove the refill,
3.Choose the fragrance you want
4.Place your new refill in the diffuser.
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |